8
Chapter 5-2.
Configure IP Address Using Pushbutton key
To setup IP address using pushbutton key, please follow these steps:
1. Connect PIH-036/038IP's analog video output to a monitor.
2. Set the mode switch (IP setup mode) to SETUP.
3. Press MENU button.
4. Press RESET button.
5. Release RESET button.
6. Release MENU button entering the menu system.
7. Follow the Menu displayed on the analog monitor to setup IP address.
Chapter 5-2-1.
Setup IP Address
After entering PIH-036/038IP menu system, analog monitor displays:
MODEL
NETWORK SETUP
IR CUT SETUP
RESET DEFAULT
EXIT
To setup IP address, press SET button at NETWORK SETUP menu item.
MAC ADDRESS
IP ADDRESS
PORT
SUBNET MASK
GATEWAY
To setup IP address, HTTP port number, subnet mask, and gateway.
Use the following buttons:
1. SELECT button
move cursor.
2. SET button
enter submenu or set a digit.
3. MENU button
finish setup and return to main menu.
After finish IP address, subnet mask, and gateway, set the mode switch to Live monitoring
mode. Press RESET button for rebooting.
