Chapter 6-7. Network Setup
PDR-2160 allows a user to access the video via Internet or LAN. In order to connect to LAN or
Internet, subnet mask, gateway, and IP address should be configured. Please consult your
Internet service provider or system administrator for above information.
Chapter 6-7-1. Network Enable
Each camera channel can be enabled or disabled for remote access. To enable or disable
remote access, follow these instructions.
①
Press Left or Right to open/close
the channel.
②
Press Up or Down to
move to the next item.
③
Press ESC to exit the
menu
NETWORK
↵
SET
←→
SELECT
↑↓
MOVE ESC EXIT
VIDEO PORT: 5000
COMMAND PORT: 5001
HTTP PORT: 0080
MAC
01 :
ON
02
NETWORK ENABLE
↵
SET
←→
SELECT
↑↓
MOVE ESC EXIT
04 :
ON
05 :
ON
06 :
ON
07 :
ON
08 :
ON
09 :
ON
:
ON
03 :
ON
SUBNET : 255 . 255 . 255 . 000
GATEWAY : 192 . 168 . 001 . 001
IP ADDR : 192 . 168 . 001 . 111
NETWORK ENABLE
Chapter 6-7-2. HTTP, Command, Video Ports
For Internet connection, port number IP mapping technologies can be used for single IP
address shared by multiple devices via a network router. Please consult your network
administrator for this advanced network technique.
Note:
Default Internet port numbers for PDR-2160/PDR-3160 are port 80 (HTML web pages),
port 5000 (video port), and port 5001 (command port).
PDR-2160 Instruction Manual
39
