Chapter 2. PTZ Controls
PTZ device can be controlled in live monitoring mode and PTZ setup mode via a keypad and/or
a remote controller. The rest of the chapter describes the ways of manipulating PTZ devices
using a keypad and a remove controller.
Chapter 2-1. Instant PTZ Controllable Mode
Instant controllable PTZ camera is shown in yellow color for the camera name/number at live
monitoring mode indicating that the camera can be instantly controlled for PTZ operations.
Moving the active camera sequentially, one can simply press the Enter button on the remote
controller. Once a camera is in active mode (text in yellow), major PTZ features can be easily
performed.
Chapter 2-2. Remote Controller & PTZ
PTZ buttons are framed in yellow that contain auto panning, zooming, and zooming out. Other
PTZ and DVR buttons are shown in blue on remote controller. The details are described as
follows:
①
Tilting the PTZ device up
②
Tilting the PTZ device down
③
Panning the PTZ device left
④
Panning the PTZ device right
⑤
Perform auto panning of the PTZ device
⑥
Perform zooming in of the PTZ device
⑦
Perform zooming out of the PTZ device
⑧
Calling presets
8
4
3
2
1
5
6
7
Chapter 2-3. Recall Presets
To call preset, please follow the following instructions:
•
Press Preset button to enable the calling preset mode. The blinking “Preset”
text on live monitoring screen indicates that PDR-2160 is in Preset mode.
•
In Preset mode, preset 01 to 16 directly to recall preset points of the PTZ
device.
PDR-2160 Instruction Manual
17
