Chapter 6-6-2. HDD Format
To format HDDs, please select HDD Format menu item. Password is required
for preventing
unauthorized access. A warning message gets prompted for final verification. Please be
alerted to this operation. It may erase not only event list data but also recorded video data.
Press Enter at HDD Format menu item to format the hard disk drives. Formatting hard disk
drives may take several seconds based on the number of lists recorded. “FORMAT
COMPLETED” message shows up after the process is done.
Chapter 6-6-3. HDD Information
HDD INFO shows the following information:
1. Model number—The model number of the
hard disk drive (arrow: recording HDD)
2. Size—The capacity of the hard disk drive
3. Used--Recorded video percentage rate
4. Rec No.—Record list count
5. Event No.—Event list count
6. Start—Starting time of stored video
7.
End—Ending time of stored video
SYSTEM
↵
SET
←→
SELECT
↑↓
MOVE ESC EXIT
MASTER
SLAVE
MODEL ST3120814A
ST3120814A
SIZE 120G
120G
USED 88.0%
100.0%
REC NO
0200
0012
EVENT NO
0000
0000
DATE / TIME
HDD FORMAT
FACTORY RESET
HDD INFO
VIDEO SYSTEM
: OFF
: EN
MESSAGE :
WILL BE LOST ALL HDD DATA
ARE YOU SURE ?
●
YES
○
NO
FORMAT COMPLETED
ESC EXIT
Caution:
To format HDDs, it erases event lists and may damage the stored video data of
the HDDs permanently.
START
08 / 12 03 : 14 08 / 14 12 : 38
END
08 / 14 12 : 38
START
08 / 16 22 : 42
END
08 / 17 20 : 24 08 / 16 22 : 42
HDD INFO
: NTSC
GLISH
PDR-2160 Instruction Manual
34
