- .
1 4 ENVIRONMENT:
Push joystick down to select <ENVIRONMENT>, and then push joystick left or
right to select INDOOR mode or OUTDOOR mode.
ATW delay time ranges are 0 ~ 255 (short ~ long).
Note:
In indoor mode the color temperature is fixed at approximately 3200K.
In outdoor mode the color temperature is fixed at approximately 6300K.
1
2
2
.
:
.
AWC (Auto White balance Control):
Auto White Balance Control mode, suitable for any color temperature environment.
Note This function adjusts the white balance regardless of the subject conditions.
Pull-in control is exercised at all times independently of the pull-in frame which
was set by the pre-white balance adjustment.
3 USER1:
Manual White Balance mode 1, suitable for 1800 ~ 10500K color temperature
environment.
Select <USER1>, and press
key into USER1
WB adjustment image.
Push joystick down to select <R-GAIN>, and then
push joystick left or right to adjust white balance to
lower color temperature, and push joystick down to
select <B-GAIN>, and then push joystick left or right
to adjust white balance to higher color temperature.
Confirm color temperature, and then press
key to
record data in the memory.
4. USER2:
Manual White Balance mode 2, suitable for 1800 ~ 10500K color temperature
environment.
Select <USER2>, and press
key into USER2 WB adjustment image.
C.SET
CTRL1
USER1 WB
R-GAIN
B-GAIN
BACK EXIT
30
20
C.SET
CTRL1
C.SET
CTRL1
48
- .
- .
1 2 DELAY CNT:
Push joystick down to select <DELAY CNT>, and then push joystick left or right
to make selection.
ATW delay time ranges are 0 ~ 255 (short ~ long).
1 3 ATW FRAME:
Push joystick down to select <ATW FRAME>, and then push joystick left or right
to make selection.
X0.5
X1.0
X1.5
X2.0
→
→
→
