Recalling Preset Positions
Once the required preset positions have been stored in a dome, they may be quickly recalled,
returning the dome to exact position.
To recall 1st Preset Position: Push key
followed by
key.
The dome will move to that position in speed of 360 /sec.
Ex. To recall 1st preset position
To recall 128th preset position
。
Setting Preset Group
The purpose of setting preset group allows the management of the 16 preset positions before
Auto Scanning. The first 16 preset positions of each dome are separated into 4 groups. Preset
group must be set for the auto pan reference.
Group 1 includes: 1st 2nd 3rd and 4th preset positions.
Group 2 includes: 5th 6th 7th and 8th preset positions.
Group 3 includes: 9th 10th 11th and 12th preset positions.
Group 4 includes: 13th 14th 15th and 16th preset positions.
To set up group 1: Push key
followed by
key.
Ex.
To set Group 1
To set Group 2,3
To set Group 3,4
To set Group 1,2,3
To set Group 2,3,4
To set Group 1,2,3,4
1
2
3
4
5
6
7
Changing Preset Data
In order to change any preset position from the one stored, the dome must first be sent to that
preset position.
To change the 4th preset position of the Dome number 3, perform the following steps:
Push
to select Dome 3
Push
to go to 4th preset position
Move joystick to bring camera to the desired view position.
Adjusting lens
Setting preset speed
Setting dwell time
Store Data
(Please refer to preset position setting for step ~ )
:
keys
:
keys
1
PRESET
8
PRESET
2
1
1
PRESET
1
2
3
4
5
6
7
8
9
0
CLR
ENT
FOCUS
FAR
ALARM
RESET
F1
F2
F3
F4
ESC
SET
DVR
MATRIX
MON
PRESET
SEARCH
CTRL2
180
。
SEQ
FOCUS
NEAR
AUTO
PAN
SHIFT
AUTO
FOCUS
AUTO
IRIS
CTRL1
C.SET
SPRAY
ICR
LIGHT
C.ESC
CAM
WIPER
LENS
3
2
1
F4
4
4
3
2
F4
3
2
1
F4
F4
4
3
F4
2
1
F4
1
F4
1
CAM
3
4
PRESET
33
