60
Alarms Setting Menu
After getting in dome setting menu, push joystick down to select <ALARMS>, and then press
key into alarms setting.
1. Display the Alarms Setting Menu
ALARMS
IN1
IN2
IN3
IN4
IN5
IN6
IN MODE
OUT
OUT TIME-OUT
BACK EXIT
POSI 1
POSI 2
POSI 3
POSI 4
POSI 5
POSI 6
NO
OFF
100 MS
C.SET
CTRL1
Push joystick down to select <IN1> to <IN6>, and then push joystick left or right to select the
connection function:
2. Connection Function of Alarm Input Setting
OFF
POSI
SCAN
SEQ.
TOUR1
TOUR2
PATROL
TRACK
→
→
→
→
→
→
→
Push joystick down to select <IN MODE>, and then push joystick left or right to select <NO>
or <NC>.
NO mode: Contact of input alarm is normally open. If contact is short, alarm will be triggered.
NC mode: Contact of input alarm is normally short. If contact is open, alarm will be triggered.
3. Input of Alarm Mode Setting
OFF: NO action.
POSI: Alarm corresponding preset positions mode.
SCAN: Perform auto scan mode.
SEQ.: Perform preset group mode.
TOUR1: Perform tour1 list mode.
TOUR2: Perform tour2 list mode.
PATROL: Perform memory patrol mode.
TRACK: Perform human tracking mode.
(The tracking functions are only for tracking models
ST9364/9368)
Note: 1. When alarm input is tracking mode, if alarm happen, the fast dome camera will
implement the <IN 1> ~ <IN 6>, and then start the tracking function.
－
2. On tracking mode, once the object move out the traceable or discriminable area, the
fast dome camera will back to the alarm corresponding preset positions 1~6 to
continue doing tracking function after 10 sec..
