www.liko.com
Assembly Instruction
Monteringsanvisning
After changing lift strap the
lift must be tested with maximum
load. Check squeeze protection.
4.129.1
3. Pull the locking rail out.
1. Remove the cover then drive the
lift strap out to the maximum posi-
tion.
2. Remove the two locking screws
from the locking rail.
7. Mount the squeeze protection
between the switch and the cover.
200
200
4. Drive the lift strap back a little so
you can see that the drum is in line
with the plate. Pull out the lift strap.
6. Mount the lift strap
5. Mount the new lift strap through
the squeeze protection.
200
Lift Strap Likorall R2R
Lyftband Likorall R2R
Prod.no: 31290028
Doc. no: TI 31290028
2003-09-09
3 and 2,5 mm
Tools required:
8. Put together the Likorall in
reverse order.
! Check the squeeze protection
before assembly the cover.
See 7TI 31290057
