www.liko.com
Assembly Instruction
Monteringsanvisning
4.91.1
3. Pull the locking rail out .
4. Drive the lift strap back a little so
you can see that the drum is in line
with the plate. Pull out the lift strap.
3 and 2,5 mm
Tools required:
1. Remove the end cover and drive
the liftstrap out to the maximum
position.
2. Remove the two locking screws
from the locking rail.
6. Mount the lift strap
5. Mount the new lift strap through
the squeeze protection.
7. Mount the squeeze protection
between the switch and the end
cover.
8. Pull the strap in to the highest
position. Feed out 10 cm. Mount the
strapstop on the lift strap
200
200
200
10,87 mm
200
After changing lift strap the lift
must be tested with maximum
load
Check squeeze protection .
Se page 4.77.1 Instructions for
change emergency lowering
device
Lift Strap Likorall
Lyftband Likorall
Prod.no: 31290011
Doc. no: TI 31290011
2003-09-09
