XAC77 Profibus-DP
®
Class 2(+VEL) example
After having set new parameter values, press the
OK
button to close
the
Properties – DP slave
window and then the
Download
button
(see icon on the left) in the toolbar of the
HW Config
window to download set
parameters.
5.2 Reading diagnostic information
System implements 16-byte diagnostic messages, for any further information
refer to section “6.7 DDLM_Slave_Diag”.
Before entering the diagnostic page, it is necessary to connect to the
unit (enter online status). To do this, select
Station\Open online
in
the
HW Config
window or click the
Online<->Offline
button (see
icon on the left). Then select
PLC\Module information…
to enter the
Module
information
window. Finally open the
DP Slave Diagnostic
page.
MAN XAC77 PX I_E 1.0.odt
38
Quick reference
