IF50
You can display your curve on the PC screen or by means of an external
oscilloscope. For this, select TOOLS in the menu bar of the OS3.2 PC operator
software, then press TEST command and finally ANALOGUE VOLTAGE FUNCTION
command. The unit will now simulate a repeating counting cycle over the full
range and generate the analogue signal accordingly.
When you use the OSCILLOSCOPE function of the operator software, you must
set the serial code < :1 > to record the analogue output.
MAN IF50 I_E 1.0.odt
12 – Scaling and linearisation functions
70 / 80
