Technical Description &
Configuration Guide
Detailed
Configuration in Web
LigoWave
Page 58
Pressing
Execute configuration
applies changes made to the corresponding section only for the local
side LigoPTP 24 FODU. If
Rollback on
is selected, configuration will be reverted in case of erroneous
configuration changes applied.
SNMP Allowed Hosts Configuration
SNMP host list
– shows the list of available SNMP hosts; adds or deletes the host IP address to the
LigoPTP 24 SNMP host table. If the SNMP host connected to the LigoPTP 24 is not added to the
LigoPTP 24 SNMP host table, the LigoPTP 24 will not respond to the SNMP requests from that host. If
“Rollback on” is selected, configuration will be reverted in case of erroneous configuration changes
applied. (command line
– snmp host {add | delete} <ipaddr>);
Write to config file
– writes to configuration file all the changes made on the whole page (command
line
– cfg write);
FODU returned
- in case of error or incorrectly entered parameter value, or other problems on the
whole page
– the info message is being shown here. Otherwise it says “Ok”.
