LightwaveRF LW825, Operation Manual

Page: 6 / 8

NOTE: If the RF range between the transmitter and
receiver is too great to achieve reliable operation, the
LightwaveRF SIGNAL BOOSTER may be used in
conjunction with this product to increase the signal
strength over greater distances.
OPERATION:
1) Press the ‘on’ button on the transmitter to turn the
paired channel on.
2) Press the ‘off’ button on the transmitter to turn the
paired channel off.
3) Press the Manual buttons to toggle each Relay
channel on/off Manually.
Complete Memory Reset (each channel)
1) Press and hold the manual button for the channel
that needs to be reset. Release the button once the
LED begins to flash. Press and hold a second time
until the LED flashes more quickly.
2) Press (don't hold) the manual button a third time.
The LED will flash quickly for 2 seconds to indicate
that the memory has been cleared.