![background image](http://html.mh-extra.com/html/lightwaverf/jsjslw452/jsjslw452_instruction-manual_1915553011.webp)
8.
Replace the plate – a ‘click’ sound
should be heard to signify that the plate
has been correctly replaced.
Important things to Consider
• Wattage ratings for the Dimmers are
per gang
. The maximum circuit load for
each 2-Way Dimmer Gang is equal to
the maximum load on the standard
LightwaveRF Dimmer it is connected to
(i.e. 250W or 210W).
Installation
•
ONLY
Dimmable lamps can be used even if the Dimmers are used solely to
switch between the on and off states without dimming. This is because the
technology used in an electronic dimmer is fundamentally different to that
of a simple on/off switch and requires compatible lamp technology.
NOTE:
Compatibility between electronic Dimmers and LEDs can be
affected if the total circuit loading is very small. Total LED load decreases
(relatively) as it is shared between a greater number of connected
Dimmers; therefore, as more 2-Way Dimmers (up to 6) are added to a
single circuit, it is possible that LED performance may become less stable.
Summary of Contents for JSJSLW452
Page 2: ......