Lightwave Research EC-1, User Manual

Page: 112 / 112

EC-1™ Menu System
)LJXUH 70481 0HQX PDS
MENU (top menu level)
ADDR Fxx/Cxxx (change existing fixture ID) TEST HOME(home the fixture)
INFO L/HR (view lamp hours) S/UP (Customer Service use only)
L/ST (view lamp strikes) SELF ALL (perform all self tests)
VER (view software version) DIM (dim self test)
L/RS (reset lamp hours & strikes) SHUT (shutter self test)
F/HR (view fixture hours) FRST (frost wheel self test)
F/RS (reset fixture hours) LENS (lens wheel self test)
TEMP CURR (current internal temperature) CYAN (cyan wheel self test)
MINT (minimum internal temperature) YELW (yellow wheel self test)
MAXT (maximum internal temperature) MAGN (magenta wheel self test)
RST (reset temperature) COLR (color wheel self test)
DMX FIXT ERRS (DMX errors) TILT (tilt self test)*
CSUM (checksum)
PAN (pan self test)*
CNTL (control value) FUNC (reserved for future use)
MSPD (MSpeed value) BOOT (copy the new boot code)
DIM (dim value) LAMP STAT (lamp status)
SHUT (shutter value) LOFF (turn lamp OFF)
FRST (frost wheel value) L ON (turn lamp ON)
LENS (lens wheel value) MODE STC (use STC DMX protocol)*
CYAN (cyan wheel value) EC1 (use EC-1 DMX protocol)
YELW (yellow wheel value) XLD (crossload fixture code)
MAGN (magenta wheel value) SET FACT ON (set factory defaults ON)
CLR (color value) OFF (set factory defaults OFF)
CLRF (color function value) CHNL DMX (set DMX start channel)
TILT (tilt value)* ADDR (set fixture number)
PAN (pan value)* DSPL ON (set display ON)
STRT (start code) OFF (set display OFF)
CE (checksum errors) DIM (dim display)
OV (overrun errors) P/IN (pan invert)*
FE (framing errors) T/IN (tilt invert)*
DATA C0001-C512 (DMX ch. values) SWAP (swap pan and tilt motion)*
CODE
SENP (pan sensor)*
S/DN 5 MN (shutdown in 5 minutes)
TPOS (tilt position)* 10MN (shutdown in 10 minutes)
PPOS (pan position*) LAMP 575W (575 watt)*
DUTY (encode duty cycle)* 250W (250 watt)*
TCOR (tilt correction)* TCAL (tilt calibration)*
PCOR (pan correction)* PCAL (pan calibration)*
TIME (main loop time)
SVCC (sensor power)
SEN2 (sensor 2)
SEN1 (sensor 1)
SENT (tilt sensor)*
MENU ENTER
<Up> arrow button: scrolls upward
through menu items or options
<Down> arrow button: scrolls downward
through menu items or options
<Menu> button: backs out
of the current menu to the
previous menu level
<Enter> button: selects the
curent menu item or option
- 1RWH = 7KHVH PHQX LWHPV KDYH QR IXQFWLRQDOLW\ 1