![Lightware RAP-B511-EU User Manual Download Page 23](http://html.mh-extra.com/html/lightware/rap-b511-eu/rap-b511-eu_user-manual_1915314023.webp)
4. Device Concept
RAP-B511 series
– User's Manual
23
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
4.2.
Inputs 1. - User Interactions
The operation of the RAP-B511 series is based on user interactions such as button press, or turn the rotary.
These are the main triggers (or inputs) of the control functions. They can be quickly and easily customize in
of the
Software Control - Lightware Device Controller
(LDC) software.
4.2.1.
Buttons
The RAP-B511 has 11 configurable buttons, and two main button
states are defined:
Pressed
and
Released.
Operation mode
is an attribution of the button, which declares the button
behavior when it is pressed or released. Three different operation
modes are available:
momentary, toggle
and
radio group (1-5)
.
The chosen
operation mode
defines how the
interaction state
changes
when the button is pressed or released (see the details about it in
the table on the right). The true or false value of the
interaction state
triggers the button LED function and the
desired action.
Momentary operation mode
Simple button function, when the button is pressed, the action will be executed.
Example
: Roll down the shades with keeping the button pressed. When the button is released, the shades stop.
Explanation
: When the button is pressed, the interaction state changes true, when the button is released, the
interaction state changes false.
Toggle operation mode
This button type toggles between two states.
Example
: Turn on and off the light with one button.
Explanation
: When the button is pressed, the interaction state changes true, when the button is released, the
interaction state does not change. When the button is pressed once again, the interaction state changes false.
Radio group operation mode
It defines the assigned radio group of the button. One button can belong to one group at the same time. Five
groups are available, one group may contain max. 11 buttons.
Example
: Select video input on a crosspoint or switcher. One input can be active at the same time.
Explanation
: When the button is pressed, the interaction state changes true and the interaction state of the
other group members are false. When the button is released, the interaction state does not change.
4.1.
General Concept
Room automation panel is designed for advanced control functions. Industrial standard communication
interfaces (RS-232, Ethernet, GPIO, IR) ensure the compatibility with third-party units or Lightware products.
They make automating the whole AV system in a huddle room possible.
Customizing the control functions can be done by making connections between the proper inputs (triggers
or conditions) and the desired outputs (actions). These settings can be done from a computer using the
Software Control - Lightware Device Controller
(LDC) software or via LW3 protocol commands (for more
details see
section).
Inputs
may come from:
▪
The Room Automation Panel by pushing (or releasing) the button, turning or pushing the rotary switch.
▪
Real-Time Clock (e.g. when the local time is equal 12:00 the action is executed).
▪
Other incoming signals: detected IR codes, recognized RS-232 messages, GPIO level changes.
Outputs
can be the followings:
▪
Button LEDs of the Room Automation Panel.
▪
Send messages (or signals) to the other device: RS-232 message sending, TPC/UDP message
sending, GPIO output state changing.
Button LEDs
OUT:
Off / LED Light
OUT
: TCP/UDP message
sending
Ethernet
OUT
: Serial message
sending
RS-232
OUT
: Output level change
(high/ low)
GPIO
Buttons
IN:
Button press,
button release
IN:
Rotary turn,
rotary press
Rotary
IN:
Local time
Real-Time Clock
IN:
Detected IR hash
Infra
IN
: RS-232 recognizer
RS-232
IN
: Input level change
(high/ low)
GPIO
These settings are available both the Event manager and the UI Config menu, but
managing the configuration is highly recommended in the UI config menu.
These settings are available only in the Event manager.
LDC
UI Config menu