Page 9/9
Section 7. Document Revision History
HDMI-TPS-TX200 series devices
Video input ports
DisplayPort, HDMI and DVI-D ports: Port names and HDCP mode
Local HDMI output port
Preview mode; Test pattern mode, clock source and type; HDCP mode, HDMI mode, Port
name
Analog audio input ports
Volume, Gain, Balance and Port names
TPS output port
TPS mode, Power +5V mode, HDCP mode, HDMI mode, Color space, Port names
Test pattern mode, clock source and pattern
Ethernet
Enable/disable on Local and Link lines
Serial port
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity, Command Injection
port number, Port names
GPIO ports
Output level, Pin direction, Port names
Audio and Video crosspoint
Crosspoint state, Mute and Lock states of Source and Destination ports, Source port priority
list, Autoselect settings
Further settings
Emulated EDID list, User EDID data (U1-U14)
Event manager: All Events’ settings (1-20)
Device label and Front panel status (locked/unlocked)
Network settings
DHCP status (enable / disable)
LW2, LW3 and HTTP port numbers
Static IP address, Network mask, Gateway address
8.
Document Revision History
Document
Release Date
Changes
Editor
Rev. 1.0
15-10-2015
Initial version
Tibor Fejes, Tamas
Lehel, Laszlo Zsedenyi
Rev. 1.1
21-02-2017
Cover photo replaced; Grammatical errors
corrected
Laszlo Zsedenyi
Summary of Contents for LW3
Page 1: ...Configuration Cloning for LW3 Devices Setup Guide ...
Page 2: ......
