Configuration Cloning
Setup Guide
Section 7. Content of the Backup File
Page 8/9
UMX-TPS-TX100 series devices
Video input ports
Port names; Test pattern mode, resolution and color
DisplayPort, HDMI and DVI-D ports: HDCP mode
VGA and DVI-A ports: Color space mode, H/V position and size, Pixel phase
Analog audio input ports
Volume, Balance and Port names
TPS output port
TPS mode, Power +5V mode, HDCP mode, HDMI mode, Color space, Port name
Ethernet
Enable/Disable on Local and Link lines
Serial port
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity, Command Injection
port number, Port names
GPIO ports
Output level, Pin direction, Port names
Audio and Video crosspoint
Crosspoint state, Mute and Lock states of Source and Destination ports, Source port priority
list, Autoselect settings
Further settings
Emulated EDID list, User EDID data (U1-U15)
Event manager: All Events’ settings (1-20)
All Presets’ settings (1-32)
Device label and Front panel status (locked/unlocked)
Network settings
DHCP status (enable / disable)
LW2, LW3 and HTTP port numbers
Static IP address, Network mask, Gateway address
Summary of Contents for LW3
Page 1: ...Configuration Cloning for LW3 Devices Setup Guide ...
Page 2: ......
