Section 8
Trouble Shooting
*NOTE
The remote control can be tested by watching the base-station display while any button
is pressed on the remote control. If the remote ‘command’ is received, the base-station
will display a message briefly. With two people, the remote’s ‘range’ can be determined
using this test.
28
Symptom
Cause
Action / Remedy
No lights
working
No ‘On’ command
Lights stay off when power applied until an ON
command is sent.
Press Garden On using the remote control
No Power to lights
Check 230V supply to light circuit
No Power to Indoor Control
Unit
Check Indoor Unit, LCD display is on and buttons
operate as expected.
Remote out of ‘range’
Test lights without the remote control using the
ON button at the base-station.
Lights changing
by themselves
‘Light Show’ is running Press ALL ON or ALL OFF to stop the show.
Battery low/missing/wrong
Check the red LED blinks strongly on the remote
control when any button is pressed. If not check
batteries are good and fitted correctly.
Out of ‘range’*
Maximum range can be under 100m
indoors. To check remote, stand next to a Lighting
Control Module outside.
Radio Interference*
Other wireless equipment causing interference
such car/house alarm, police radio, mobile phone.
iPhone not working
Wifi Status or Config menu is
displayed
Press “
9
” key to exit menu and return to clock
display
Remote Control Handset
‘Dead’
