Section 6
Security
System Code
The Light Symphony system has a potential wireless range of several Kilometres
(using repeater units) so it is important to avoid interference with neighbouring
systems. For this reason a ‘System Code’ is employed which can be set from 1 to
32. Systems set with different codes will not interfere with each other.
The Lighting Control Modules adopt the System-Code from the remote control
that is used to program them. By default the Remote control System-Code is set to
1, but can be changed by following the instructions that came with it.
If the Remote-Control and therefore Lighting Control Module’s System-Code has
been changed then the base-station must be configured to match.
Press the “
9
” key to enter the ‘Set System code’ menu. The display will change;
Adjust the System Code with the Up / Down keys and press the “
9
” key to store
and exit.
25
System Code 01
Press
9
to
Set System Code
