Zulu.2’s Bluetooth interface allows cell phone and
stereo music streaming capability (A2DP).
Connecting Bluetooth Cell Phones for the First Time
Before using a Bluetooth cell phone for the first
time with Zulu.2 it must be “paired” or electronically
connected.
To pair a Bluetooth cell phone with Zulu.2:
1. Turn on the headset and verify the GREEN
LED is flashing. Make sure Zulu.2’s Bluetooth
mode is turned OFF. BLUE or RED flashes from
the Bluetooth LED should not be present (see
“Bluetooth Mode—ON and OFF”, page 13).
2. Press and hold the Zulu.2 Bluetooth button for
about five to ten seconds or until the Bluetooth
LED
continually flashes RED and BLUE
. This
indicates the Zulu.2 pairing mode setting and
lasts about two minutes. If this step takes longer
and the Bluetooth LED is no longer alternating
RED and BLUE, start over from step one.
3. With Zulu.2 in pairing mode, follow the menu
prompts on your Bluetooth phone directing it to
look for Bluetooth devices.
4. Select Lightspeed-V### (numbers may vary) on your
Bluetooth phone from the list of found devices
5. If asked to enter a password or PIN, enter 0000
Your cell phone should now be paired and ready for
continued use with Zulu.2.
When you turn on the Zulu.2 Bluetooth mode it will
connect to the most recently paired device. Most
Bluetooth Devices
12
Summary of Contents for Zulu.2
Page 1: ...Zulu 2 User Guide...
