16
1. Overview
2. Setup & Use
3. Optional
Accessories
4. T
roubleshooting
5. W
arranty
, Safety
& Specifications
SENSOR
INPUT
SENSOR
SHORT
CH A
CH B
MIXED
24VDC/250mA
3C. CONNECT CAT 805iX TO AN AMPLIFIER
1. Ensure the power is turned OFF
and the microphone volume
controls are turned all the way
down.
2. Determine whether you wish to
connect to the mixed output or
the individual microphone outputs
(CH. A / CH. B):
a. MIXED OUTPUT
(Recommended for most
applications): connect to this
output if you wish to connect
the mixed signal of micro-
phone A and microphone B
into a single input on the
amplifier.
b. CH. A/CH. B OUTPUTS:
connect to these outputs if
you wish to use the amplifier to
control each microphone
channel individually.
3. Insert the stripped wires into the
marked openings on the euro-
block connector:
a. Unbalanced cable connection
(included cable): connect
the signal wire to the positive
connection (+) and the shield to
the ground.
b. Balanced cable connection
(not included): this connector is
recommended for long cable
runs of 12 feet or more.
Connect the positive and
negative signal wires to the
marked terminals, and the
shield to the ground terminal.
4. Secure the inserted wires by
tightening the retaining screws.
5. Insert the
1/4
” connector (or other
appropriate connector type) into
an input on the existing amplifier.
SENSOR
INPUT
SENSOR
SHORT
CH A
CH B
MIXED
24VDC/250mA
