14
1. Overview
2. Setup & Use
3. Optional
Accessories
4. T
roubleshooting
5. W
arranty
, Safety
& Specifications
1. Screw the bracket to a place
high on the wall or in the middle
of the solid ceiling. Mount the
bracket horizontally as shown
below.
2. Uncoil the Cat 5 sensor cable.
Connect one end of the cable to
the ISR. Route the wire back to
the CAT 805iX preamp, securing
it along with way using surface
raceway where possible.
3. Slide the ISR onto the bracket
until it “clicks” into place.
a. Guide the mounting rails onto
the bracket, oriented as
pictured.
2. IR SENSOR/RECEIVER (ISR) INSTALLATION
CONT’D
Wall/Solid Ceiling Mount
b. Once secure, the ISR locks
into place.
c. To remove the ISR, slide a ruler
or screwdriver behind the ISR to
press the release bar down and
slide the ISR off the bracket
4. Connect the other end of the Cat 5
sensor cable into the SENSOR INPUT
jack on the CAT 805iX preamp.
