LightSand S-2500B, Installation And User Manual

Page: 36 / 86

3-8 S-2500B Gateway
7.
From the local gateway’s workstation, establish a Telnet connection from the local
gateway to the IP address of the remote gateway’s SONET / SDH port.
8.
CLI or GUI commands can now be issued for the remote gateway from the local
gateway’s workstation.
Running the SANman GUI
The SANman Graphical User Interface can be used as an alternative to the CLI for some of the
configuration steps. It provides visual tools for managing the gateway network. Please refer to
the
SANman User Guide .
Monitoring and Performance
LED Indicators
There are seven LED indicators on the back panel of the S-2500B which can be used to
monitor the system status. Figure 3-1 below shows the back panel label. The LED meanings
are further described on the following page.
Figure 3-1: S-2500B LED Configuration Label