LightSand S-2500B, Installation And User Manual

Page: 7 / 86

Quick Start Guide vii
gateway:>
show tp pos 1 ip info (if IP enabled)
gateway:>
show tp pos 1 ip rip info (if IP enabled)
gateway:>
show port fc 1 info (if FC enabled)
gateway:>
show port ether 1 info (if IP enabled)
gateway:>
show port ether 1 ip info (if IP enabled)
gateway:>
show port ether 1 ip rip info (if IP enabled)
gateway:>
show port ether 1 info (if IP enabled)
gateway:>
show ip all-routes
gateway:>
show snmp trap info
If all configuration parameters look good, the system is ready to operate.
Use the following command to reboot the system while keeping the current configuration:
gateway:>
reboot
Use the following command to reboot the system and restore it to the factory default settings:
gateway:>
config sys restart cold
Use the following command to shut the system down without rebooting:
gateway:>
shutdown