![background image](http://html1.mh-extra.com/html/lightronics/tl4008/tl4008_owners-manual_1915008002.webp)
Page 2 of 4
TL4008 MEMORY CONTROL CONSOLE
Version 1.7
OWNER’S MANUAL
06/28/2022
www.lightronics.com
Lightronics Inc.
509 Central Drive, Virginia Beach, VA 23454
757 486 3588
Number of channels 8 or 16 depending on mode
Operating modes
8 CH x 2 manual scenes
16 CH x 1 manual scene
8 CH and 8 recorded scenes
Scene memory
8 scenes total
Chase
2 programmable 40 step chases
Control protocol
Standard DMX512
Optional LMX-128 (multiplex)
Output connector
5 pin female XLR for DMX
Options
Add on 3 pin XLR for LMX
Sole 3 pin XLR for DMX
Compatibility
DMX512
LMX-128 protocol compatible
with other multiplex systems
Power input
12 VDC, 1 Amp external
power supply provided
Dimensions
10.25"W X 9.25"D X 2.5"H
Weight
4.4 Pounds
The LMX-128 option is not able to be combined with
the 3 pin XLR for DMX option.
INSTALLATION
The TL4008 control console should be kept away
from moisture and direct sources of heat.
The TL4008 may be powered by an external supply
with the following specifications:
Output Voltage: 12 VDC
Output Current:
800 Milliamps minimum
Connector:
2.1mm female connector
Center Pin:
Positive (+) polarity
DMX CONNECTIONS:
Connect the unit to a DMX
Universe using a control cable with 5 pin XLR
connectors. An external power supply must be used
if only DMX is used. A 3 pin XLR connector for DMX
instead of a 5 pin XLR is an option when ordering.
X
FADERS
Y
FADERS
BLACK
OUT
MOMENTARY (BUMP) BUTTONS
RECORD
MASTER
FADER
Y MODE
SELECT
CROSS
FADERS
CHASE
RATE
CHASE
SELECTORS
PIN #
PIN #
SIGNAL NAME
1
1
Common
2
2
DMX data -
3
3
DMX data +
4
-
Not Used
5
-
Not Used
DMX 5 PIN/3 PIN CONNECTOR WIRING