8
Connection with the mains
Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
Cable
Pin
International
Brown
Live
L
Blue
Neutral
N
Yellow/Green
Earth
The earth has to be connected
OPERATION
After you connected the effect to the mains, the DMX LED SCANNER starts running. During the Reset, the motors are
trimmed and the device is ready for use within approximately 20 seconds.
Turn the objective-lens for adjusting the focus in order to obtain a sharp projection.
LED display instructions:
A001~AXXX (AXXX)
DMX Address
SOUND
MAST (SO-M)
Sound active as MASTER
fixture
ALON (SO-A)
Sound active independently
AUTO
MAST (AU-M)
Auto run as MASTER
fixture
ALON (AU-A)
Auto run independently
RPAN
ON/OFF
Reverse pan
RTIL
ON/OFF
Reverse tilt
RDIS
ON/OFF
Display upside down
MIC
M-XX
Sound sensitivity
FITI
0000-9999Hour
Fixture using time
REST
Reset
LOAD
Loading datas
