4.2 Mount the luminaire on support or vertical pole with diameter 48-60 mm. Adjust luminaire's
position using the bubble level (1) on the bracket. Fix the luminaire by tightening lock screws
(2) with at least 18 Nm of torque. Lock the screw with hexagonal nuts (3).
4.3 Release screw (4) if needed. Set luminaire tilt angle needed using marks on the bracket
(marks intervals -
10°, turn intervals - 5°). Tighten the screw (4) with at least 18 Nm of torque.
ATTENTION! Luminaire lifting and carrying by mains cable is not allowed, it may cause moist protection
failure, cable and luminaire’s internal circuits damage.
Dimensions
Summary of Contents for SKYLINE LED/M
Page 1: ...SKYLINE LED M Manual ...