INSTALLATION AND OPERATION RULES
The luminaire should be used
according to «Standard code of customer electrical installations».
Installation, cleaning and replacing of the components should be done only with the main power
off. The diffuser should be cleaned with soft cloth and mild detergent.
1.
Switch mains power off. Unpack the luminaire.
2.
Strip mains cable according to dimensions shown.
3.
Release cable connector's nut (when available) on luminaire side, remove bushing on the
other side and pull out terminals block. Connect mains cable having put it through bushing
and observing polarity shown. Tighten bushing and cable lock nuts, tightening torque 2.5 Nm.
4.
Installation on pole support.
4.1 Tools needed
Summary of Contents for SKYLINE LED/M
Page 1: ...SKYLINE LED M Manual ...