Lighting Technologies ARCTIC STANDARD 1200 TH 4000K Manual Download Page 6

 

WARRANTY

 

The manufacturer shall repair or replace a luminaire that has been found to be defective under normal 
use through no fault of the customer provided that it was delivered, stocked, mounted/installed and 
operated in conditions and according to the requirements specified in a product data sheet, engineering 
specifications, mounting and service instructions, delivery terms, rules for technical maintenance of 
electrical installations and other conditions agreed by the manufacturer and the customer during the 
warranty period or expanded warranty period specified below.

 

The luminaire is a serviceable device. When installing the luminaire, free access should be provided for 
service or repair. The manufacturer is not responsible and will not compensate any expenses related to 
construction work, rental vehicles etc. in case the repair site is not readily accessible.

 

The statutory warranty period is determined by the applicable law, and may vary from country to 
country. The manufacturer undertakes statutory warranty obligations in the amount and within the time 
frame stipulated by the applicable law.

 

Warranty period - 60 months from date of delivery subject to terms and conditions specified herein and 
on the manufacturer’s website at 

https://www.ltcompany.com/en/terms/

 

The  warranty  period  of  emergency  power  supply  units  (supplied  with  rechargeable  battery)  and 
illumination control system components (supplied without luminaires) is limited to 12 (twelve) months from 
date of delivery. 
Warranty does not apply to color change of painted surfaces and plastic parts during luminaire operation.

 

 

Luminous flux level is at least 70% of the nominal value during the warranty period. 
Warranty  will cover the  entire  period, given that  assembly, installation  and  operation  of luminaires  are 
handled by specialized technical personnel and according to the luminaire's manual. 
The  service  life  of  the  luminaires  under  normal  climatic  conditions  subject  to  installation  and  usage 
instructions is: 
·      8  years  –  for  luminaires  with  body  and/or  optical  parts  (diffuser)  made  of  polymeric  materials. 
·   10 years - all other luminaries. 
The  manufacturer  reserves  the  right  to  make  modifications  to  the  product  that  improve  its  end-user 
performance.  
The manufacturer is not liable for typographical and other errors that may have occurred in printing. 

ACCEPTANCE CERTIFICATE

 

The product conforms to TOR 3461-001-44919750-12 and has been found fit for use. The luminaire is certified. 

Manufacture date _________________________________________________________________________ 
Inspected by _____________________________________________________________________________ 
Packaged by _____________________________________________________________________________ 
 
Manufacturer address: Magistralnaya st., 11-a, Ryazan, 390010, Russia 
Date of sale ______________________________________________________________________________ 
                 

www.ltcompany.com                                                                                                                   Company stamp 

Hotline 

0049 89 550 59 8611 

Summary of Contents for ARCTIC STANDARD 1200 TH 4000K













Reviews: