5.
Connect mains cable to terminal block on assembly panel according to polarity shown.
5.1 Connect the power supply wires to terminals L1, N1 of the terminal block in accordance with
the specified polarity.
6.
When the luminaire with emergency unit is connected to mains for the first time it is
recommended to wait for battery fully charges (24 hours).
7.
Click the assembly panel into luminaire’s body.
8.
Luminaries installation should be done with X5 mounting hardware kit (doesn’t included).
Using of other mounting hardware will void the warranty.
9.
Lock two snap locks (on different sides of the body) with self-tapping screws 3,5х9,5
(included).
10. To secure plastic snap locks from accidental release under external mechanical impact it is
possible to lock them through pre-made holes with self-tapping screws 3,5х9,5 or 3х10 (not
included in the package).
CONNECTION SCHEMES
1.
Mains connection scheme.
2. Mains connection scheme with backup power supply: (fig. а - backup power supply).
DIMENSIONS (IN MILLIMETERS)
