Never work on the luminaire when the voltage is switched on.
Do not operate the luminaire without protective grounding.
Position the luminaire to avoid long viewing into the luminaire at a distance of less
than 0.5 m.
Only operate the luminaire if the diffuser is undamaged.
Do not disassemble, repair, or modify the luminaire. Caution - danger of
electric shock!
The light source contained in this luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
In case of a malfunction, immediately unplug the luminaire from the mains supply.
Only perform installation and maintenance with the luminaire disconnected from the
mains supply.
The luminaire has passed the high-potential dielectric strength test as per IEC 60598-1-2014.
Do not cover the luminaire with insulating material
INSTALLATION AND OPERATION RULES
The luminaire should be used according to «Standard code of customer electrical installations».
Installation, cleaning and replacing of the components should be done only with the main power off. The
diffuser should be cleaned with soft cloth and mild detergent.
1.
Switch mains power off. Strip mains cable (max 2.5 mm2) according to figure. Unpack the
luminaire.
2.
Remove diffuser from unpacked luminaire, remove assembly panel.
ATTENTION!!!
Touching LED board surface with hands or solid objects is not allowed in order to avoid LED damage.
When powered on, there is hazardous voltage on LED board. Do not turn on without diffuser!
