Pg. 10 www.lightingcontrols.com
Group Types:
When controlling more then eight loads or when controlling any loads from a time
schedule, groups are required . GROUPS describe what loads are controlled and how they are controlled .
MOMENTARY ON
“On Mode” more than 8 loads .
MOMENTARY OFF
“Off Mode” more than 8 loads .
MOMENTARY MIXED
“Mixed Mode” more than 8 loads .
MAINTAIN
Used by time schedules and photocells controlling more than 8
loads . When the GROUP is On, the loads are On, and when the
GROUP is Off, the loads are Off .
MA TIMER
Usually used only with Time Schedules . When the GROUP is On,
the loads are On . When the GROUP is Off, any switch controlling
any loads within the GROUP may only turn those loads On for a
programmed time .
MA BLINK
Uses all of the features of the MA TIMER and adds a “blink
warning” prior to shutting loads off .
Control Types:
”Control Types” describes how loads are controlled .
TOGGLE
Toggle up to 8 loads On or Off .
ON MODE
Up to 8 loads On only .
OFF MODE
Up to 8 loads Off only .
MIXED MODE
Also known as an “interlock”—this turns one set of loads On and
another set of loads Off .
MAINTAIN
Loads are On during a closure and Off when the closure is opened;
similar to a wall switch—used by photocells .
GROUPs (1-32)
To control more than 8 loads, or when programming a time schedule,
always use GROUPs .
CONTROL TYPES & GROUP TYPES
