lighting control & design GR 2400 Programming Manual Download Page 1 | Manualshive

Page: 1 / 12

lighting control & design GR 2400 Programming Manual Download Page 1

GR 2400

BASIC PROGRAMMING GUIDE

Programming Guide Index

Introduction .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Navigation Basics .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3
Programming a Digital Switch   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Adding or Deleting Loads .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Basic Photocell Settings .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6-7
Editing Time Schedules  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8
Schedule Types & Trigger Events   .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
Control Types & Group Types .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10
Programming Groups .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11

Important Note:

This programming guide covers the basics—programming switches, schedules and photosensors . Other manuals

exist for more advanced programming issues . Call us if you have questions or need assistance during the

programming of your system . Technical Support: 800-345-4448

1
2
3
...
»

Summary of Contents for GR 2400













Reviews:

No comments