Lighthouse Remote 3014PN, Operating Manual

Page: 39 / 84

00
248083317-1 Rev 4 4-1
4
Communication Set Up
This chapter contains information on how to set up the REMOTE-4PN
in order to program and communicate with it.
Definitions of
Terms Used
This list is provided for the convenience of the user or technician.
• ARP - Address Resolution Protocol, a program that can change
the ARP Cache of a host by adding or removing IP addresses.
Each IP address is associated to a MAC address.
• ARP Cache - List of IP addresses and their associated MAC
addresses for hosts whose addresses cannot be resolved normally.
• DHCP - Dynamic Host Configuration Protocol, a program
running on a server that issues IP addresses to computers or
devices (Hosts) on its LAN.
• Gateway - a network device that controls traffic between two or
more networks.
• Hardware address - a unique identifying code programmed by the
factory into a network device, such as a network PCB, comprised
of six two-digit groups of letters A-F and numbers 0-9.
• Host - a computer or device that allows access to itself via a LAN.
• IP (Internet Protocol) Address - a unique logical address used to
identify a host on a TCP/IP network.
• LAN - Local Area Network, a group of computers or hosts
connected together in a relatively small geographical area, such
as a building or floor of a building.
• MAC address - the same as hardware address.
• Netmask - a logical hexadecimal number that prevents accessing
hosts outside of its range. A bit value of zero allows access and a
non-zero blocks access.
• Subnet - a logical grouping of hosts based on their IP addresses.
• TCP/IP - a communication protocol suite that is used for the
Internet and a large number of LANs that allows hosts to share
data.
• Telnet - a communication program used primarily to issue
commands directly to a TCP/IP-based host.