Lighthouse Worldwide Solutions REMOTE 5104V, Operating Manual

Page: 39 / 78

Getting Started
248083293-1 Rev 7 3-15
DIP Switches
The DIP switches are used for addressing the instrument for RS-485
daisy chain configurations and setting the communications mode. See
“DIP Switch Communications Mode” on page 4-2 for details.
Positions 1-6 set the address of the instrument.
Position 7 and 8 set the communications mode.
The DIP Switches require a tool with a small, pointed tip in order to
change. A very small screwdriver or multimeter probe can be used.
Instrument Mounting
The R5104V is designed with mounting tabs to assist with simple
mounting to a wall or other flat, vertical surface. Make sure the
instrument is oriented with the bottom of the instrument level and
facing down. Figure 3-21 illustrates the dimensions required by the
R5104V for proper mounting.
Figure 3-21 Mounting Details
Q
; >PP@
02817,1*+2/(