2
USER INSTRUCTIONS
LIGHTFORCE.COM
DIY HARNESS INSTALLATION KIT
CONTENTS
• 1 x Driving light harness
• 1 x HB3 patch harness
• 1 x H4 patch harness
• 1 x Switch loom (dual switches)
• 1 x Screw for relay installation
• 2 x T-taps for wires (2 sizes)
• 4 x Spade terminals (2 sizes)
• 15 x Cable ties
• 1 x User instructions.
TOOLS AND CONSUMABLES REQUIRED
• Spanner
• Pointy nose pliers
• Wire cutters
• Phillips head driver bit
• Flashlight (recommended)
• Torque wrench (recommended).
TOOL REQUIRED FOR
NON-STANDARD INSTALLATIONS
• Crimping tool.
PERSONAL SAFETY WARNING
WARNING: High intensity light source.
Do not look directly into the light during operation,
eye injury may result.
Visit lightforce.com/installations to view
instructional videos.
NOTE:
If you are using a different switch with
dash illumination (not included), a Lightforce
Switch Adaptor (not included, see Figure 9) will
be required. Follow the instructions included with
the Lightforce Switch Adaptor. The yellow dash
illumination cable (item 10 in figure 1) will need to
be wired to the dash light / park light.
