Lightair CellFlow Pro900, Manual

Page: 14 / 32

14
CLEANING AND CARE
•
You need to make sure the device is not electrified before cleaning it. Power off the
device and unplug the cord.
• For external cleaning, please use a damp cloth or sponge, gently dry off the product
after cleaning.
•
Avoid getting the particle-filter wet.
• please deconstruct the centre cone with the
round white plastic part in the centre
•
Pull the part straight out as it is press-fitted
•
When cleaning or replacing the pre-filter or the
particle filter
•
Now the pre-filter can be disassembled, by
pulling it straight out!
•
Vacuum the prefilter or wash it carefully in
lukewarm water
• Dry completely before reassembling it again,
needs to be kept moisture free
•
Even the Cellflow particle filter can be cleaned
now on site by vacuuming it
•
Make use of a soft brush as a vacuum nozzle
•
Do circles in the particle filter during
vacuuming by moving in circular motions
•
Particle filter can also be demounted during
replacement
•
Grab the central part of the particle filter, pull it
straight out
• During installation process, refer to the
keyways, the central part can only be fitted in
one way, can not be put on incorrectly
•
Turn the large front-loop carefully counter-clockwise
until it stops
•
Detach the front-loop
1. 2.
3. 4.
ENGLISH