■
Temperature of the external surface
The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady state, is 120
℃
.
t 120
℃
c
■
Maintenance
Before starting any maintenance work or cleaning the projector, cut off power from the mains supply.
After switching off, do not remove any parts of the fitting, to avoid getting burnt for at least 30 minutes.
After this time the likelihood of the lamp exploding is virtually nill.
The fitting is designed to hold in any splinters produced by a lamp exploding. The lenses must be
mounted and, if visibly Damaged, they have to be replaced with genuine spares.
■
Lamp
The fitting mounts a high-pressure lamp that needs an external igniter. This igniter is fitted onto the
apparatus.
Carefully read the "operating instructions" provided by the lamp manufacturer.
Immediately replace the lamp if damaged or deformed by heat.
■
Battery
This product contains a rechargeable lead-acid battery. To preserve the environment, please dispose
the battery at the end of its life according to the regulation in force.
Pb
The products referred to in this manual conform to the European Community Directives to which
they are subject:
Low Voltage 2006/95/CE
Electromagnetic Compatibility 2004/108/CE
外表面最高温度
在热稳定的状态下
,
外表面的温度最高点可达
120
℃。
维护
在开始任何维修工作或清洁灯具之前,必须切断供电电源。电源切断后,为了避免烧伤,10分钟内
不可拆卸灯具中的任何一个零部件。冷却过后灯泡爆炸的可能性几乎为零。如果需要更换灯泡,
则需再等待20分钟,以免烧伤。
灯泡
灯具上装有一个需高压触发器的灯泡，此触发器安置在灯具上。
请仔细阅读灯泡制造商提供的“使用说明”。
如灯泡有损坏或热变形,请立即更换灯泡。
电池
本产品包含一个可充电锂电池。为了保护环境
,
请根据规定处理寿命结束的电池。
该产品符合欧洲共同体要求，遵守：
低压
2006/95/CE
电磁兼容性
2004/108/CE
3
www.lightsky-china.com
PROFESSIONAL SHOW LIGHTING
Summary of Contents for F1000 WASH-50R
Page 1: ...F1000 WASH 50R F1000R WASH 50R...
Page 27: ......
