LIGHT PROGRESS
STICK-NX [eng]
gen-2021
Pag. 6/16
INSTALLATION
In the case of application of UV-STICK for direct irradiation of the environment, the device should be positioned on the
ceiling almost in central position. The installation of several units should be carried out so as to distribute them uniform-
ly in the environment (to avoid the hidden areas, such as the corners; it should allow all the air to be treated). These
models can be mounted on the wall and still comply with the regular distribution (Fig. 2).
The area/space covered by the UV STICKS...NX devices is shown in Table 1. The final result of the disinfection will still
be made dependent on the amount of germs coming in from the external environment.
To fit the model of UV-STICK-E...-NX using the two stainless steel brackets supplied, anchoring them to the ceiling by
screw anchors (
8 ÷
10 mm.) or by self-tapping screws (not supplied).
After inserting the anchors onto the ceiling, you should tighten (by supplied stainless steel screws M4x10) the device to
the two brackets, and then you should screw the brackets to the ceiling.
For the model, UV-STICK-E2/...-NX you must drop the UV device from the ceiling by a not supplied chain, connecting
the chain to the ring of the supplied steel bracket.
