LIGHT PROGRESS
STICK-AL [eng]
Nov-2019
Pag. 6/16
RECEPTION
Handle with care as fragile material. Verify the integrity of the packaging, and please be careful not to damage the
contents when using sharp blades or cutters to open the box. Remove the unit from the box, then inspect it immediately
to ensure that no damage has occurred during transport. Before installation and using the device please READ CARE-
FULLY THE SECURITY WARNINGS and all others instructions that follows.
INSTALLATION
In the case of application of UV-STICK for direct irradiation of the environment, the device should be positioned on the
ceiling almost in central position. The installation of several units should be carried out so as to distribute them uniformly
in the environment (to avoid the hidden areas, such as the corners; it should allow all the air to be treated). These models
can be mounted on the wall and still comply with the regular distribution (Fig. 2).
The area/space covered by the UV STICKS devices is shown in Table 1. The final result of the disinfection will still be
made dependent on the amount of germs coming in from the external environment.
To fit the model of UV-STICK using the two aluminum brackets supplied, anchoring them to the ceiling by screw anchors
(
8 ÷
10 mm.) or by self-tapping screws (not supplied).
After inserting the anchors onto the ceiling, you should tighten (by supplied stainless steel screws M4x6) the device to
the two brackets.
