LIGHT PROGRESS
STICK-AL [eng]
Nov-2019
Pag. 4/16
DEVICE DESCRIPTION
UV-STICK...AL
device includes a series of UV-C reglette of reduced size and different lengths.
The device is a reglette built entirely in extruded anodized aluminum, IP55 protection and fitted with a reflecting screen
in mirror bright aluminum, to increase the power of radiation,
through the reflection of UV-C proportion that would otherwise
be wasted in the opposite direction to the useful ones.
The extruded aluminum case, contains special electronic bal-
lasts to maximize yield and duration of UV-C lamp.
To avoid flying splinters of glass after the collapse of the UV
lamp, a protection of the UV lamp by means of the special
thermo-retracted sheath UVLON®-PIPE (Tetrafluoroeth-
ylene), with UV-C transparency >85%. can be provided, al-
ways as an option UVLON®-PIPE is a patented system to
withstand the wear and tear; it has low adhesion to any prod-
uct or substance, is resistant to any aggressive chemical at
high or low temperatures. It is a polymer conforms to F.D.A.
tests for use with foodstuffs.
The constituent materials of UV-STICK...AL allow its use even
in harsh operating conditions (high humidity, low tempera-
tures, etc..), or where conditions require a high resistance to
chemicals and weathering.
UV-STICK
is built with high quality, extremely resistant com-
ponents, it works perfectly in difficult operative conditions (high
Humidity, low temperatures, etc).
OPERATING
UV-STICK produces direct radiation by UV-C ultraviolet rays. When activated, it generates a strong reduction of microbes
in the air and on the irradiated surfaces. For instance, with the model UV-STICK E75H NX, in 2 ÷ 3 seconds a reduction
of 99% of bacteria (Bacillus, E. coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, Strep-
tococcus, etc..) is obtained, at the distance of 10 cm.
UV-STICK can be installed in any type of environment, to obtain a deep disinfection of air and surfaces, even those
difficult to reach with traditional cleaning systems. The use of this device is allowed only in the absence of personnel;
otherwise, the device should be contained within adequately screened boxes or protections. In case of use for the disin-
fection of work environments, the device must be turned on for 2 ÷ 3 hours during the time of absence of staff workers.
For example, by means of a time switch, you can manage the switching-on of the lamps in the hours immediately before
the entry of operators, so as to start a new working cycle inside a disinfected environment.
The schedule of the irradiation time can be made by a MASTER-ST series electronic control unit, which can manages
several operations, like:
•
Programmed switching on.
It is possible to program the duration of the irradiation by means of an adjustable
timer..
•
Personnel entry detector.
A safety system switches off the lamps in case of intrusion of personnel.
•
Failure alarm.
In
case of failure of one or more lamps of the device, a warning light will turn on to enable the
identification of the lamp/lamps off, and an electric contact will open to signal the failure.
•
Hour counter
. To manage the correct replacement for exhausted lamps.
