![background image](http://html1.mh-extra.com/html/light-my-bricks/103266/103266_installation-manual_1911654035.webp)
LEGO BATMAN TUMBLER 76240 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 35
24
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
Connect the
two Bit Light Cables
into the 6-Port
Expansion Board
from step 21.
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
2x Adhesive Squares
Only twist the
two Bit Light Cables
from step 20.