2
It will control any 6-in-1 RGBWAUVLED fixture that has a DMX profile with the six colours running over 6
channels where each channel represents a colour – red, green, blue, white, amber and UV. Each fixture needs to be
in DMX mode, and set 6 channels apart.
3. Operation
On the rear of the product, there are connections for DMX out and power in. Connect the power supply
to the power in, connect DMX out to the DMX cable going to lighting fixture(s).
A.
Set the status of the fixture which is to be controlled:
1) All the fixtures must be in DMX mode
2) The DMX address of the first fixture must be set to 001,the second fixture must be set to 007,the
third fixture must be set to 013,the fourth fixture must be set to 019,the fifth fixture must be set to
025,the sixth fixture must be set to 031.
3) The fixture must be in the 6 channels mode, the LED lighting protocol must be R-G-B-W-A-UV
or R-G-B-A-W-UV.
B .Select the fixture which is to be controlled by HEX LED controller:
The HEX LED controller can control 6 LED fixtures at most with individual control. Note
additional fixtures can be added but they repeat as light 1,2,3, etc – for example the 7
th
light would
have to be on address 001 and treated as a second number 1 light.
