28
(this feature is useful if you are using the light on your head and
cannot see the blinking power switch). This signifies that you have
approximately 15 minutes of battery power left.
If you continue to run the light, discharging the battery, the light
will automatically drop to the next setting—activating the same
step down procedure mentioned in the previous paragraph. This
signifies that the light will shut down in approximately 1 minute.
Thermal Protection Circuitry
Stella incorporates state-of-the-art thermal protection circuitry.
This allows the light head to produce an exceptional amount of
light for its size, while safeguarding the circuitry from the heat that
is produced. If the light head gets too hot (most likely to occur
in the High setting and while not moving), the circuitry will cause
the light head to automatically drop to a lower setting. Once you
are moving again (creating airflow) the light head will automatically
return to the High setting. You can also manually override the
circuitry by pushing the switch as in normal operation. If the light
head detects too much heat, it will simply drop down to the lower
setting, until it has sufficiently cooled.
Stella 180-L
Power Level
High
Med
Low
Read
Flash
Lumens
180
120
70
40
—
Burn Time (hrs)
5.0
10.0
20.0
40.0
100.0+
Summary of Contents for Stella 180-L LED
