10
Lens Installation / Removal
To Install Lens
1.
Perform O-ring inspection.
2.
Align lens to housing details. Groove on lens hood aligns with lens latch.
3.
Press firmly lens into housing to compress O-ring
4.
Rotate clockwise until Locking pin engages.
To Remove Lens
1.
Slide Locking pin outward away from lens.
2.
Rotate lens counter clockwise. This may require another person’s assistance.
3.
Pull away from housing.
Rewind
No VTR Function
Frame Back
when paused
Reverse
during playback
Fast Forward
Frame Advance
when paused
(Fig. 14)
Pause
Play
Stop
Fast Forward
Slow Motion
(Fig. 15)
Using the Bluefin in VTR Mode
Push the Bluefin’s Mode button until the camcorder enters VTR Mode, as listed and
illustrated below, the Bluefin’s Smart Grip Controls allow you to control the
camcorder’s VTR functions while the camcorder is still inside the Bluefin.
Left Smart Grip Controls
(Refer fig. 14)
Near
- Frame Advance while paused
Rec
- Fast Forward
Lights
- Not used
Mom.Af
- Rewind
Far
- Frame Back while paused and reverse direction during playback
Right Smart Grip Controls
(Refer fig. 15)
Wide
- Slow Motion
Tele
- Stop
Mom. Af
- Pause
Af/Off
- Play
Rec
- Fast Forward