LiftEquip TW160, Operating Manual

Page: 70 / 112

Operating manual Servicing and Maintenance
TW160 drive
TK Aufzugswerke
70
Version 08/2021
WARNING
Risk of scalding!
Caution: hot oil represents a risk of scalding!

Be particularly careful.
3. Close the oil drain after discharging the gear with sealing tape and the cap.
4. Fill the machine with the prescribed oil quantity through the upper opening on
the gear housing (fill opening cap, see Fig. 3.2-1
5. Check the level with the oil dipstick (see Fig. 8.3-1).
Only rest the oil dipstick, do not screw in.
6. Enter the date for the next oil change in the type plate on the gear housing.

Item Designation Item Designation
1
Oil filling hole
see Fig. 3.2-1 item 9
2 Oil dip stick
3 Oil drain
Fig. 8.3-1
8.3.3 Checking the oil level
Only place the oil dip stick (red cap) in position to check the oil level; do not screw in.
The oil level should be between the two markings.
2
1
3