Scale
© Lift-Rite 242484-017
19
Or
1. Depress the
No
button for 3 seconds.
2. Depress the
∧
button to go up a value or press the
∨
button
to go down a value until the required value is reached.
3. Depress
<
to change to the next digit.
4. Repeat this procedure until the required code is displayed.
5. To accept the new code depress ENTER (
↵
).
- The code is activated and the display returns to normal
weighing mode.
You may make a printout and add up the weights. A spe-
cial printout will be made which includes the code. (See
option printer).
NOTE!
If the code is “000000” it will be ignored and it will not be
printed on the ticket.
Piece counting: Sampling
If an unknown piece weight is to be determined you may do this
by sampling a certain number of pieces. The number of pieces
taken from or placed on the weighing system determines the
accuracy of the sampling. The total weight of the pieces taken
from or placed on the weighing system for the sampling should
be no less than 4-5 kg. The greater the weight difference, the
greater accuracy. The standard sampling amount is 10 pieces,
but this number can be increased up to 95 pieces.
NOTE!
If the accuracy is too low when sampling, the indicator will
show "ERR05". Press any key to return to piece counting
mode and increase the sampling amount.
1. Depress the
button.
- The display shows "add10". The 'kg' pointer turns off and
the 'pcs' pointer goes on.
2. Take or place 10 pieces from/on the weighing system and
press the ENTER (
↵
) key.
- The sampling is done and the display will show the total
number of pieces on the weighing system.
Or
1. Depress the
∧
button or the
∨
key to change the number of
pieces to add.
- The display will show the new value to add. (for example
"add50")
2. Take or place the correct number of pieces from/on the
weighing system and press the ENTER (
↵
) key.
- The sampling is done and the display will show the total
number of pieces on the weighing system.
