STEP 3
- SETTING THE CLOCK
NOTE: Any time that you need to reset the clock, press and hold SET CLOCK
hr” appears, and repeat all parts of STEP 3.
1.
On the time display, “12
+ or – .
2.
– .
3.
4.
5. Press SET CLOCK. The small “
M
” and “
D
display of the date, press + or – .
6.
– .
8 . Press SET CLOCK. The “E” (f
to Spanish or French, press + or – . Press SET CLOCK again.
9. The clock will show the day of the week to the right of the date.
If you prefer to display the year instead, press SET CLOCK again.
STEP 4
- SETTING THE WAKE-UP ALARM
NOTE: Any time that you need to reset the wake-up alarm time, press and hold
2.
+ or – .
You can adjust the volume of your wake-up alarm to high or low with the HI - LO slider
switch on top. If there is a re emergency the alarm will sound at maximum volume.
TROUBLESHOOTING ERROR MESSAGES
PLEASE READ THE USER’S MANUAL COMPLETELY AND THOROUGHLY FOR
FURTHER DIRECTIONS, PRODUCT FEATURES AND WARRANTY INFORMATION
7.
3. Press ON/OFF to enable or disable the wake-up alarm. The bell icon at lower
For more information, go to www.lifetonesafety.com
or call Customer Service 1-800-648-7923
MODEL HLAC150
Battery ERROR
Bed shaker ERROR
Bed shaker unplugged
BEEP!
BEEP!
Batteries:
“BATT” and beeping at one minute intervals, the
batteries were not installed, were installed with the wrong polarity, or are below
the required voltage. Remove and insert them again or replace them if necessary.
Be sure to match the polarity (+ and –) signs in the battery compartment. To keep
the setup with your smoke alarm, leave the clock plugged in while you change batteries.
Bed shaker:
beds
” and the clock beeps, the bed shaker has come
NOTE: If you decide you don’t want to use the bed shaker after it has been installed,
unplug the bed shaker. Then press the red TEST/SILENCE button on the back of the clock for
2 seconds and release it. That starts a manual self-test that will display “TEST” for 10 to 20
seconds, sound the fire alarm once, and “retrain” the clock to operate without a bed shaker.
Buttons on the top of the Lifetone HL™
left will appear or disappear to indicate whether the alarm is active or inactive.
WAKE-UP TIME
BELL
NOTE: Any time that you want to restore use of the bed shaker, simply plug it in.
HOUR
MINUTE
DAY
MONTH
MONTH OR
DAY FIRST
YEAR,
LANGUAGE,
DAY OF WEEK
(OR DAY)
(OR MONTH)
KEEP THIS QUICK-START GUIDE IN A SAFE PLACE
Doc# LTQSG150E130713
800 Research Parkway, Suite 339
Oklahoma City, OK 73104
1.
To set the hour, press + or – .
