15
X
SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3.3
3.4
1/2" (13mm)
(x1)
AAQ
(x2)
ABQ
(x1)
• Use the 1/2" (13 mm) socket head from the socket head wrench to press one Push Nut (AAQ) onto one end of the
Axle (ABQ)
.
AAQ
ABQ
• The Push Nut (AAQ) should rest about 1/4" (6 mm) from the end of the Axle (ABQ). If the Push Nut (AAQ) slips
on too far, continue sliding it to the other end of the Axle (ABQ) to remove it and try again.
!!
• Slide the end of the
Axle (ABQ)
through the
Rim (ALX)
and the
Rim Pivot Bracket (APY)
. Press the
Push Nut (AAQ)
onto the
end of the
Axle (ABQ)
. Use the 1/2" (13 mm) socket head to secure the
Push Nut (AAQ)
if needed.
AAQ
ABQ
APY
ALX
ABQ
1/2" (13 mm) Socket Head
